Thursday, September 24, 2015

There's an updated cloud in town Part 2: Still Installing ICO 2.5

A few more hurdles overcome as I get closer to getting ICO 2.5 installed.

Some RHEL 7 notes

The firewall in RHEL7 (and 7.1) is not iptables. Instead, it's the firewalld service that's controlled by systemd. I'm not sure which install option causes it to be configured because it wasn't running on all of my RHEL 7.1 systems. Anyway, to turn it off, you can run:

systemctl stop firewalld
systemctl disable firewalld

In my case, it was blocking port 53 (dns), which I needed open to configure the vCenter server (next section). I first just used Applications->Sundry->Firewall to open port 53, then realized that I could just turn it completely off in my test environment so I don't hit any more problems with it.

Installing vSphere 6.0 Without a Windows Machine

I decided to also install vSphere 6.0 to use that as a testbed, and that has a few challenges. Specifically, the vCenter Server Appliance (VCSA) no longer ships directly as a .OVA file. It is now an ISO file that you're supposed to mount and run on a Windows machine to remotely install the vCenter Server Appliance on a remote ESXi server.

I didn't want to get a Windows machine involved if at all possible, and it turns out to be fairly straightforward to do this. You will find 99% of the instructions in this great article:

http://www.unixarena.com/2015/05/how-to-deploy-vcsa-6-0-on-vmware-workstation.html

Specifically, the .OVA file can be found in the .ISO file that you download from VMWare. It just doesn't have a .ova extension. So you need to extract the file, change the name to include the .ova extension, and then you're mainly off to the races. HOWEVER, you have to do ONE MORE THING to actually get it working. Specifically, you need to add this additional line to the end of the .vmx file after you import the .ova file:

guestinfo.cis.appliance.net.dns.servers="172.16.30.8"

Set the value appropriately for your network. If you don't add this, the VM will start up, but will have the error:

Failed to configure network

And I couldn't find a way to fix that in the VM as it stood. I updated the DNS settings, rebooted the server, did lots of other things, etc., and it still just showed that error. So I knew I would have to recreate the VM from the OVA file, but needed to figure out how to set the DNS server of the VM from the VMX file.

So I mounted the VCSA ISO file on Linux and ran the following command at the root of it:

grep -r guestinfo.cis *

Somewhat amazingly, that came back within seconds and I found all of the settings from the linked article, and then I searched for "dns" and found the above REQUIRED setting.

I didn't have a "good" DNS server on my network, so I quickly created a DNS server on one of my RHEL7.1 systems. It's REALLY easy to do this if you have all of your hosts in the /etc/hosts file. You just need to run the command:

service dnsmasq start

systemctl start dnsmasq

(Edit 9/26: I changed the above command to use the systemd mechanism for starting the service)

And that's it. You now have a DNS server.

You still NEED a Windows machine for vSphere


I thought that the vSphere Web Client would allow me to just use a browser, but that's not quite right. the web interface requires Flash, and really only supports Windows or MacOS clients. So I've had to bring a Windows machine into the mix anyway.

No comments: